The Tremoline FT36 Performante is unique and presents the only Flat Top Fine Tuning Floating Tremolo system, and is also a new original DOUBLE-LOCKING Tremolo System (known as a vibrato mechanism or whammy bar), patented in the USA, Germany and other countries.
The Tremoline FT36 Performante tremolo system is not only a fully functional RETROFIT of the most widely spread Double-Locking Tremolo System, but also it is the only fine tuning double locking RETROFIT of some of the 2-point (74.2mm) non-locking tremolos.
The Tremoline FT36 can be equipped with one of four types of Locking Nuts - right handed - R2 (width-41.4mm) or R3 (width-42.8mm) and left handed - L2 or L3.
Two fixing options for Locking nuts exist - from above (by two wood screws) and from underneath (by two metric thread screws).
The concept for the appearance of the Tremoline FT36 and other of our products is the achievement of BETTER PERFORMANCE through more CONVENIENCE and SOUND QUALITY.
The Tremoline FT36 is the only tremolo system that allows the guitar pick usage for adjustment and makes the fine tuning process so simple, quick, and intuitive.
All metal parts are produced only from solid bars, sheets and wires of specially selected STAINLESS STEEL alloys through a variety of cold machining processes.
All parts are NON-MAGNETIC, which leads to the lack of magnetic interference (unwanted noise).
The only plastic part is made of specially selected engineering plastics, which withstand heavy loads, are acid-resistant, dimensionally stable, long lasting and provide low friction.
All parts comply with RoHS 2 (European Directive 2011/65/EU for the Restriction of use of certain Hazardous Substances).
All parts are NON-ALLERGENIC and comply with ISO 10993-10 (European standard for biocompatibility).
All used coatings are made with the latest generation coating technology and in addition to the brilliant decorative appearance, are essential to wear and abrasion resistance.
Tremoline FT36 Performante – Convenience, Durability and Longevity.
|Tremolo Unit type:||double locking system|
|E-E Center width:||52.0mm / 2.06”|
|String spacing:||10.4mm / 0.41”|
|Pivot Stud spacing:||74.2mm / 2.92”|
|Tremolo Unit Radius:||406.4 mm / 16”|
|Sustain Block Thickness:||12.0mm / 0.4724"|
|Sustain Block Height:||35.0 mm / 1.3780"|
|(Alternative Block Height):||38.0 mm / 1.4961"|
|Locking Nut type:||R3|
|Nut Base width:||42.8mm / 1.6875”|
|E-E center width:||36.0mm / 1.4155”|
|String spacing:||6.6mm / 0.2591”|
|Locking Nut Radius:||304.8mm / 12”|
|Nut Base fixing:||from above and underneath|
|Retainer Bar kit:||included|
|Tremolo System set Weight:||0.780 kg|
Tremoline FT36 Tremolo System set includes following parts:
|Tremolo Unit set:||1|
|String Lock Insert||6|
|Fine Tuning Screw||6|
|Saddle Mounting Screw||6|
|String Lock Screw||6|
|Trem Mounting Screw||2|
|8mm Retainer Screw||2|
|Tremolo Arm Spring||1|
|Tremolo Arm Washer||1|
|Tremolo Arm Sleeve||1|
|Spring Claw Screw:||2|
|Clamp Cable Lug:||1|
|Cable Lug Screw:||1|
|Key wrench 2.5mm:||1|
|Key wrench 3.0mm:||1|
|Retainer Plate (opt.):||0|
|12mm Retainer Screw:||2|
|16mm Retainer Screw:||0|
|Locking Nut set:||1|
|Locking Nut Base||1|
|Locking Nut Clamp||3|
|Locking Nut Washer||3|
|Nut Mounting Screw:||4|
|Nut Mounting Washer:||2|
|Nut Bar Screw:||2|
FT36-R3-CS Tremolo System